The assistant will not try to activate already activated copies of Windows 7, and is not compatible with other versions of Windows. The Activation Assistant will open automatically after the installation process. You may receive an error that states, “The activation windows activation tool windows 7 does not meet the basic requirements or is not in the correct format, please verify the key with your input. If you receive this error, do the following:
To help prevent software piracy, Microsoft requires that Windows is activated before it can be used as full-version software. There are two methods for activating Windows: WPA involves two numbers. One is an Installation ID generated by entering a Windows product key that the computer owner submits to Microsoft.
This method is used when upgrading or installing a new Windows edition from disc not HP System Recovery. No intervention is required to activate the operating system software before initial use. With SLP-activated systems, most of the computer’s hardware can be replaced without needing to re-activate the software through Microsoft. However, if you decide to install a different Windows Edition on your computer, you will need to activate the new version of Windows. There may also be situations when Windows prompts you for product activation even though the product has already been activated.
Your Windows version To learn more about how to activate Windows, choose one of the following sections that applies to your version of Windows. These warnings open periodically until Windows is activated. You must enter a valid product key to continue using an upgraded version of Windows. To view activation status and activate Windows, do the following: Connect to the Internet. If you cannot connect to the Internet at this time, you can activate by phone later or repeat these steps when an Internet connection is available.
Click Start , right-click Computer, and select Properties. Scroll down on the System Properties window to view the Windows activation status information. To activate Windows 7, continue following these steps: Click Change product key. If you want to activate over the phone, click Activate Windows now, click See other ways to activate, and follow the on-screen instructions. Type the product key into the Product Key field, click Next, and then follow the on-screen instructions to complete activation.
You are done. Activate Windows 7 using System Recovery If your computer came with Windows 7 installed, you can use System Recovery instead of activating Windows online or over the telephone. This restores Windows 7 to its original factory condition, which is pre-activated by default. If you have added any hardware or software, you must reinstall it after running System Recovery. Activate Windows 7 after using System Recovery After performing a System Recovery, or re-installing Windows 7, it should not be necessary to repeat the activation process.
There are several different recovery situations to consider. If the computer shipped with Windows 7 and the Recovery Manager is functional, then use the Recovery Manager to restore the computer to its default factory conditions. Windows 7 is automatically activated.
If the computer shipped with Windows 7 but the Recovery Manager is not functional, use the Recovery disc to restore the computer to its default factory conditions. If the computer shipped with an earlier version of Windows but included an upgrade disc for Windows 7 provided by HP, you should recover the computer back to its default factory conditions and then upgrade again to Windows 7.
If the computer shipped with an earlier version of Windows and you upgraded or custom-installed a full retail version of Windows 7, you should use the Microsoft DVD to re-install Windows 7. If the computer shipped with Windows 7 and the Recovery Manager is not functional, but you have not created the recovery discs, you can order a Windows 7 Recovery DVD. It may be necessary to contact Microsoft to activate Windows 7. Windows Vista product activation You might be prompted to activate Windows Vista.
Normally, activation in Windows Vista is done automatically on HP and Compaq Desktop computers, but some conditions turning off the computer during Windows setup, for example can cause a Windows Activation message to be displayed. When this happens, Windows Vista requires activation or a System Recovery. If you can still use the Windows Vista desktop, click Start , right-click Computer, and select Properties to view the status of Windows Activation.
Scroll down on the System Properties window to view the status information. If you can still open Windows Vista, you might be able to download a software update that can resolve this issue. If computer Windows Activation screens still continue or you were not able to update your computer, the rest of this information can help you activate or recover your computer.
There are three ways to activate Windows Vista: The first two methods require an Internet connection and the last method requires a voice telephone to dial a toll-free number. The Automated Phone System might take several minutes due to the number of digits that need to be entered. Use the following steps to activate a computer when the Windows Product Activation message opens.
To activate your computer: Before starting, if you have a broadband Internet connection, make sure the network cable is connected to the computer. If you have a dial-up modem Internet connection, make sure a phone line is connected to the modem connection on the computer.
From the Windows Activation window, click Type a different product key. Enter the product key number into the product key field and then click Next. This number can be found on a Certificate of Authenticity label adhered to the side of the computer’s case. If product activation was successful, a success screen is shown and Windows Vista setup continues.
If online product activation failed, an “Activate Windows Now” window opens. Click Show me other ways to activate, and then click Next. A “How do you want to activate Windows?
If a modem is not connected, skip this step. If a modem is connected, use the following sub-steps to activate over the modem: Make sure the phone line is not in use, click Use my modem to connect directly to the activation service, and then click Next. If product activation is not successful, you are returned to a previous screen. Repeat these steps using the automated phone system or perform a system recovery. To use the automated phone system, click Use the automated phone system from the How do you want to Activate?
To find available phone numbers for activation, select a location near you from the drop-down menu, and then click Next. If a phone is not near the computer, get paper and a pencil to write down the installation IDs and confirmation IDs.
Use a phone to dial the number provided in the Activate Windows Now window. Follow the instructions from the phone system to enter the installation ID numbers and write down the confirmation ID numbers.
Enter the confirmation ID numbers into the fields A through H, in the same sequence as the phone system provided them. When done, click Next. For more information about Windows Vista activation, please refer to the Microsoft support article You might be prompted to activate Windows Vista on a computer on which Windows Vista was already activated by a Volume License or OEM installation in English.
When you try to activate your computer online, using the product key, you are prompted to call the Microsoft Activation call center. The appropriate regional phone number displays. If the Installation Identification Number matches one assigned to an HP product, the Microsoft representative should provide a Confirmation Identification Number that allows you to complete the activation process. If product activation was successful, a success screen is shown and Windows XP setup continues.
Helpful information The following is a list of reasons why product activation might be necessary, and an explanation of terms used during the activation process. Reasons why Windows might need to be activated The following conditions might cause an SLP-activated computer to require activation through Microsoft: Upgrading Windows.
Installing certain device drivers and software. Uninstalling certain operating system software or files. Certificate of Authenticity COA – A proof of ownership identification method to help prove that a product is not counterfeit or copied.
It could be in the form of a label that contains a bar code and product identification number. Installation Identification Number – Generated based on the Certificate of Authenticity key entered during Windows setup.
Confirmation Identification Number – Number that allows you to complete the activation process. One or more of the links above take you outside the Hewlett-Packard website.
HP does not control and is not responsible for information outside the HP website.
Method#1: List of Windows 10 Product Keys
3 days ago Although there are conventional methods to activate Windows, you can find a lot of tools to activate Windows online too. Many Windows 7. It can help you to activate Windows 7 Enterprise, Windows 7 Windows 7 Activator are tools for you to activate your Microsoft Windows 7.
VIDEO: Windows Activation Tool Windows 7
It is capable of activating the final versions of Windows 7, Windows 8, windows activation tool which can come in handy to activate your windows 7 all editions. Learn more about how to activate Windows 7 or Windows , including how to use a phone for activation.